Graphite BMW E60 saloon on silver multispoke wheels outside a pale-brick workshop

BMW E60 / E61.
The coilover guide.

Shop the coilovers

Choose an E60 or E61 kit by body, drivetrain and factory suspension. The Touring's rear air system, the M5's electronic dampers and the AWD front strut need checking against the exact kit's fitting requirements.

Which E60 / E61 do you have?6 listed kits · 3 brandsReviewed 17 November 2026

Check the body, drivetrain and factory suspension.

Before ordering coilovers, check whether your 5 Series is an E60 saloon or an E61 Touring, and whether it has rear-wheel drive or xDrive. Kits have different body and equipment requirements. Check an M5 separately, even where the product name simply says E60.

For a car used every day, choose the finished height with your usual roads, passengers and luggage in mind. Give the fitter your wheel and tyre details so they can check clearance and suspension travel. On a Touring, have the existing rear air and self-levelling equipment identified before choosing parts.

BMW introduced this generation of 5 Series in 2003, with the Touring following in 2004. E60 identifies the saloon and E61 the Touring. Use the build date and original market when matching the car to a kit's application dates; registration year alone can leave the wrong version in the shortlist.

BMW's launch E60 training describes coil springs around the dampers at both ends. The E61 has separate rear air springs and dampers in its training material, which specifies self-levelling as standard on the 530xiT described there. Check the equipment on your car and any later modifications.

BC lists rear-wheel-drive, xDrive and M5 applications separately. I-86 specifies a 50 mm front shock size for the AWD E60; I-15 names the M5 saloon. BMW's M5 training also identifies EDC electronic damping. Confirm how the exact replacement kit works with the car's electronics before comparing a passive kit with Bilstein DampTronic.

Start with your E60 / E61.

Match the model year, drivetrain and body style before comparing brands.

Graphite E60 saloon on silver wheels parked outside a pale-brick workshop

E60 rear-wheel-drive saloon

BC lists I-09 for the rear-wheel-drive E60. Eibach PSS65-20-011-01-22 has its own engine list, axle limits and non-levelling conditions. Send the engine, build date and both permitted axle ratings so the current application and mounting parts can be checked.

Check my E60 saloon
Dark-blue E61 Touring estate seen from the rear at a country viewpoint

E61 Touring and rear air suspension

Eibach lists a separate Touring reference, PSS65-20-011-02-22. Have GSM check its current fitting documents against the rear air and self-levelling system on your car, including any previous changes. Check Touring fitment and any proposed air-to-coil conversion separately; the saloon rear assembly and BC's E60 entries do not confirm either.

Check my E61 Touring
Silver E60 saloon on silver wheels standing in a gravel courtyard

AWD E60: confirm the 50 mm front strut

BC's I-86 entry names the AWD E60 and specifies a 50 mm front shock size. Ask the fitter to identify the existing front assembly and confirm the measurement for that kit. Include any changed mounts; an xDrive badge alone does not confirm fitment, and an E61 needs a separate check.

Check my AWD application
Burgundy E60 M5 saloon on silver wheels parked outside quiet pit garages

E60 M5: agree the EDC requirements

BC I-15 names the M5 saloon. Bilstein B16 DampTronic 49-234923 is listed for the E60 M5 with EDC. Confirm the exact car, axle ratings and electronic requirements before choosing. A passive kit label does not confirm whether EDC can be retained or which parts would be needed to change it. An M5 Touring requires its own application check.

Check my M5 specification

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Plan the height with normal loads, wheel clearance and the fitting work in mind.

Read the buying advice

Tell the fitter about the roads you use and the load you normally carry. Include mounts and any required original parts in the quote, then agree a height that leaves the suspension room to work. Compare I-09 or the saloon Pro-Street S reference only when it covers your E60. A Touring needs its own rear-air check; for an M5, settle the EDC requirements first.

  • Allow for normal passengers and luggage
  • Include mounting parts in the quote
  • Set the height before final alignment
Plan my 5 Series road setup

Discuss the tyres and both uses of the car before agreeing springs and damping.

Read the buying advice

If you use another wheel and tyre set on circuit, supply both specifications. Have the fitter check travel and clearance at the agreed heights and loads, and discuss the spring and damper specification for the job. I-86's BR RS and RM MA options name different front assemblies; confirm the complete configuration. Check suitability for the intended event and any proposed E61 rear-air conversion separately; the model listing does not confirm either.

  • Provide both wheel and tyre sets
  • Agree the complete spring and damper specification
  • Keep the setup and inspection records
Discuss my road and circuit use

Choose the suspension with the builder using the completed car's specification.

Read the buying advice

Give the builder the measured weight, tyres and brakes, together with any changes to the suspension or mounting points. Agree springs, damping and working travel alongside the event requirements. For an M5 project, include the plan for EDC before ordering. Ask for a specification for the completed car, and check competition eligibility and altered mounts separately from the listed road-model applications.

  • Measure the completed car
  • Agree mounts and electronic requirements
  • Check the intended event rules
Discuss my 5 Series circuit project

The saloon rear unit differs from the Touring's air suspension.

A spring surrounding a damperA fixed component diagram. The coil spring surrounds the shock absorber and rests on its spring seats. It does not show vehicle dimensions, mounting hardware or suspension movement.Coil springDamperSpring seat

The rear spring surrounds the damper on a standard BMW E60 saloon.

Component layout only. Mounts, dimensions and adjusters vary by kit.

BMW's launch E60 training describes coil springs around the rear dampers. The diagram represents that saloon arrangement; confirm the exact kit's dimensions, mounts and adjustment instructions separately.

BMW's E61 training and rear-axle cutaway show separate rear air springs and dampers. Have the existing system identified, including previous conversions. Check the current fitting documents for Eibach's separate Touring reference; do not assume it replaces the rear air springs or supplies a conversion.

Ask the workshop how the selected kit sets height and leaves the required damper travel. Check the actual rear mountings, spring retention where applicable and wheel clearance at the intended running height, with the car's normal load accounted for.

Understand height and spring preload
Mechanic holding a clipboard beside a graphite E60 saloon standing on a level workshop floor

Quote the complete fitting job before booking it.

Have the fitter inspect the bushes, joints and retained damper mountings. Confirm which front and rear mounts, bearings, fixings and original parts the exact kit supplies or needs. On an M5, agree the electronic damping requirements. On a Touring, check the selected kit's current fitting requirements for the existing rear system.

Provide wheel width, offset, tyre size and any spacer details. Have clearance checked through steering and suspension movement as well as with the car standing still. Agree the finished height before final alignment, and keep the measurements and follow-up requirements with the service record.

Top mounts and retained parts

I-09 and I-15 are listed with no front top mount and a rubber rear mount. Confirm the front mounting parts to retain or replace. I-86 has separate BR RS and RM MA options, so include the chosen configuration in the fitting quote.

Touring rear air equipment

Identify the air springs, dampers and self-levelling system on the actual car. Give GSM details of any conversion or later modifications so the current Touring fitting documents can be checked against them.

Wheels, tyres and spacers

Eibach's application notes warn that original wheel sizes may need spacers for clearance. Have the fitter check the exact wheel and kit combination; the note does not prescribe a spacer thickness or confirm clearance with every aftermarket wheel.

Lowering and original sport suspension

Check what the kit's stated drop is measured against. A car already lowered by its factory suspension may have less additional drop than the headline figure suggests. Choose the final height with travel, clearance and normal loads in mind.

The current E60 / E61 range.

Compare the controls and hardware included in each range.

BC Racing

The manufacturer list separates I-09 E60 rear-wheel drive, I-15 E60 M5 saloon and I-86 E60 AWD with a 50 mm front shock. The shop gives nominal front/rear spring rates of 6/4.5 kg/mm for I-09 and 6.5/4.5 for I-15 and I-86. I-86 offers BR RS rubber top mounts or RM MA inverted front/rubber rear. Confirm the complete supplied assembly; spring rates alone do not tell you how the car will ride or whether the kits interchange.

View BC Racing E60 / E61 kits

Bilstein

The historical B16 DampTronic 49-234923 row names the 373 kW E60 M5 with EDC, September 2004 to December 2009. It gives maximum axle ratings of 1,090 kg front and 1,270 kg rear, with 15-35 mm lowering at each axle. Match the current approval and electrical connections to your car. Check an ordinary E60 or M5 Touring separately; this reference does not confirm either application.

View Bilstein E60 / E61 kits

Eibach

The historical Pro-Street S table lists E60 saloon PSS65-20-011-01-22 with front/rear axle limits of 1,070/1,235 kg and 25-55 mm lowering at each axle. E61 Touring 02-22 has limits of 1,070/1,300 kg and 25-45 mm. These are two-wheel-drive applications with their own engine and equipment conditions. Obtain the current documents for the exact kit and car, particularly for the Touring's rear levelling system and any required original parts.

View Eibach E60 / E61 kits

Find your E60 / E61 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

6 listings

Selected application: All E60 / E61 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All E60 / E61 kit links and part numbers

Before you order.

  1. Identify your car

    Send the body, engine, build date and original market, plus both permitted axle ratings from the car's identification plate.

  2. Match the kit

    State rear-wheel drive or xDrive. For I-86, have the existing front assembly and specified 50 mm shock size checked.

  3. Check what’s included

    Identify EDC, rear air or self-levelling equipment and any previous suspension changes. Include the full M5 specification where relevant.

  4. Check your modifications

    Provide wheel width, offset, tyre size and spacers. Match the full kit reference and configuration to the current fitting documents and mounting parts.

  5. Plan fitting

    Confirm current supply before booking fitting, and include alignment and the workshop's follow-up requirements.

Questions about BMW E60 / E61 coilovers.

Check the details before choosing your kit.

Can I use an E60 saloon kit on an E61 Touring?

Check a Touring-specific application. BMW's E60 training describes springs around the rear dampers; the E61 material shows separate rear air springs and dampers. Eibach lists a separate 02-22 Touring reference. The BC E60 entries do not confirm E61 fitment or an air-to-coil conversion.

Which car does each BC reference name?

I-09 names the rear-wheel-drive E60, I-15 the rear-wheel-drive E60 M5 saloon, and I-86 the AWD E60 with a 50 mm front shock size. Confirm the exact build, factory equipment and supplied mounting parts before ordering.

Does an xDrive badge confirm I-86 fitment?

BC's I-86 entry also specifies a 50 mm front shock size for the E60. Have the fitter identify the existing front assembly and confirm the measurement for that kit. The row does not confirm E61 Touring fitment.

Which listed kit is intended for the M5's electronic dampers?

Bilstein lists B16 DampTronic 49-234923 for the E60 M5 with EDC. Match the current approval, axle ratings and electrical requirements to your car. BC also lists I-15 for the M5 saloon, but its application entry does not confirm whether EDC can be retained or which cancellation parts would be needed.

How do the two Eibach references differ?

PSS65-20-011-01-22 is the E60 saloon reference; 02-22 is listed separately for the E61 Touring. Historical limits are 1,070 kg front/1,235 kg rear for the saloon and 1,070/1,300 kg for the Touring. Check the current engine, drivetrain and equipment conditions, particularly the Touring's rear levelling requirements.

Does the Touring kit replace the rear air springs?

Have GSM obtain the current fitting documents for PSS65-20-011-02-22 and check the rear equipment on your car. The model listing does not confirm an air-to-coil conversion, the rear lowering method or the parts required. Include any previous conversion when requesting the check.

Do the BC listings include front top mounts?

The shop labels I-09 and I-15 as no front top mount/rubber rear. I-86 has BR RS rubber top mounts and RM MA inverted front/rubber rear options. Confirm the exact configuration and all retained or supplied parts with the fitter before ordering.

How much should I lower my E60 or E61?

Choose the height within the exact kit's approved range and allow for the original suspension, normal loads and actual wheels and tyres. Have the workshop check working travel, spring retention where applicable and clearance through movement before final alignment. A published lowering range is not a recommended setting for every car.

Let’s talk suspension.

Send your E60 or E61's body, engine, build details and axle ratings. Include the drivetrain, factory suspension and wheel specification so GSM can check the exact kit and mounting requirements.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.