BC Racing Coilovers - Honda Crv (98-01) [RD1/RD2]

Fitting BC Racing Coilovers Honda Crv gives you adjustable ride height and adjustable damping on the factory mounting points. Chassis code RD1/RD2. Fits 98-01 cars. Default spring rates are front 9 kg/mm / rear 4.5 kg/mm. Because height is adjusted at the lower bracket, dropping the car does not add spring preload. You keep the full damper stroke instead of running out of travel at the bottom. BC Racing Coilovers Honda Crv specification Vehicle Honda Crv (98-01) Chassis code RD1/RD2 Manufacturer Honda Brand BC Racing Default spring rates Front: 9 kg/mm / Rear: 4.5 kg/mm SKU BCR-A-10 Available kit configurations Configurations can use different damper designs and mounting arrangements. Check the selected kit code. The kit code is the BC Racing part number for that build. Configuration Kit code Top mount BR Series - RS: Rubber top mounts A-10-BR-RS rubber top mounts front and rear Which series for the Honda Crv? BR Series gives you 30-way damping adjustment and full height adjustment independent of spring preload. Spring rates and what is in the box This kit ships at 9 kg/mm front and 4.5 kg/mm rear. The rates are matched front to rear for a balanced setup on the road. Rates are chosen by BC Racing per application, so they suit a fast road and occasional track car as supplied. If the car is built for something more specific, a track car or a car carrying a lot of aero, the rates can be changed without replacing the dampers. The kit covers all four corners and includes the dampers, springs, lower brackets, locking collars and the adjuster spanners. Top mounts depend on the configuration you pick from the table above. Anything that is worn on the car already, drop links, bushes, top mount bearings, is worth checking while the suspension is apart. Fitting and setting up BC Racing Coilovers Honda Crv Work on a flat floor, set the height on the lower brackets, then roll the car forward and back to settle everything before you take a final measurement. Alignment comes after the height is set, not before. Start with the damping adjusters in the middle of their range and work from there. Wind towards firm for track work and back off for road use, changing one end of the car at a time so you can feel what each change did. The kit is rebuildable and the springs are a standard ID, so a rate change later is a spring swap rather than a new set of coilovers. Worth reading if you are new to this: how a coilover works and why height and preload are separate adjustments. BC Racing Coilovers Honda Crv questions Will BC Racing Coilovers Honda Crv fit without modification? The kit is cut to the Honda Crv damper and strut dimensions and uses the standard mounting points on the RD1/RD2 chassis. Check the listed fitting requirements for this application before installation. How low will the Honda Crv go on these? Height is adjustable across the full range of the lower bracket. How low you can usefully run depends on your wheel and tyre size and how the car is used, so set it to suit how the car is actually used. What spring rates do BC Racing Coilovers Honda Crv come with? Front: 9 kg/mm / Rear: 4.5 kg/mm as standard. The springs are a standard ID, so rates can be changed later without replacing the dampers. Do I need an alignment afterwards? Yes. Camber and toe both move as the car comes down, so book the alignment once the ride height is set and the suspension has settled. Are these road legal? Adjustable suspension is legal for road use in the UK. Keep the ride height sensible, make sure nothing fouls at full lock or full compression, and tell your insurer the car has been modified. Give us a call or drop us the registration if you want the BC Racing Coilovers Honda Crv configuration checked against your car before ordering. More from this range: BC Racing coilovers . Other Honda kits: Honda Prelude FWD , Honda Acura Integra FWD , Honda Civic/CRX FWD .